The miniGITA Dual is a significant enhancement of our well-known miniGITA TLC instrument.
Testing radiochemical purity with thin layer chromatography and the execution of basic gamma spectrometry are routine for most nuclear medicine laboratories and SPECT or PET facilities.
A reliable, easy to use instrument, fulfilling the today standards in GMP and documentation rules is mandatory for optimal working.
The dual head combined with different collimators and detection technologies allows high-end TLC scans and a multichannel analysis in one device.
By nature, measurement, scanning resolution, sensitivity, limit of detection, dynamic range and spectrum analysis need antipodal technical solutions.
The miniGITA Dual was designed to be as flexible and adjustable as possible to ensure that you can always get the highest performance and the best setup for your application.
To avoid human errors and to be fully GMP compliant, all settings and configurations are detected automatically and stored in the electronic report. Probe type, probe distance and even the collimator type are registered.
Β A complete line of probes using different scintillator material, and different detection technologies such as PMT tubes or totally new digital detection technologies, ensure the best detection for each application.
With our Elysia Communication protocol, simply change the detector/probe and the system will recognize the type and the serial number of the detector. This will give you perfect documentation of your setup and enhance your GXP tools.
The new ECP allows advanced control and diagnostics of your probes to ensure a better performance and remote diagnostic capability.
TheΒ miniGITA Dual is directly controlled by our GINA software. The same software can be upgraded to control the radio-HPLC, the GC or the multichannel analyzer, allowing high flexibility, a faster adaptation and a short learning curve.
Background subtraction, a half-life-time correction and dead time correction are only some features included.
Model |
Application |
Β ResolutionΒ Β |
Dynamic range |
Multichannel |
Collimator |
miniGITA OFA probe |
SPECT & PET |
ππππ |
πππ |
πππ |
Yes |
miniGITA PET probe |
PET |
πππππ |
πππππ |
Β |
No |
miniGITA New Gen probe |
SPECT & PET |
ππππ |
πππππ |
ππ |
Yes |
miniGITA MCA probe |
SPECT & PET |
π |
πππ |
πππππ |
No |
miniGITA Alpha probe |
Alpha |
ππππ |
πππ |
----- |
Yes |
Β
miniGITA OFA (One fits all) probe:
The One Fits All is based on our V-Shaped BGO technology. The crystal allows you to detect SPECT and PET isotopes. The special V-shaped gives the best resolution without a compromise of sensitivity. A broad range of collimators allows you to adapt the probe to a larger energy band. The detector also has a multichannel function and is suitable for basic spectrum scans.Β
miniGITA PET probe
The OFA New Gen Probe is based on a V-Shaped BGO probe ensuring optimal resolution with high sensitivity to SPECT and PET isotopes. The probe uses new electronics with increased dynamic range allowing you to use higher activities without signal saturation. A broad range of collimators allows the probe to be applied to a large energy range.
miniGITA MCA probe
This is a standard 2x2ββ NaI crystal combined with a 2ββPMT. All miniGITA probes use our ECP and can be applied with a GABI Nova instrument for radio flow detection. The large crystal and the high quality PMT are the best choice for spectrum analysis and nucleic identification.
miniGITA 3SA probe
The 3SA (Self Shielded Spectrum Analysis) probe for self-shielded spectrum analysis has been designed to achieve optimal spectrum analysis when combined with our TLC scanner. To eliminate background problems, the probe is self-shielded. Like all miniGITA probes, it uses ECP technology and can be used in combination with several other Elysia instruments. Built-in high quality PMT is the best choice for spectrum analysis and nucleic identification.
miniGITA Alpha probe
The miniGITA Alpha probe has been designed to provide optimal alpha sensitivity when combined with our TLC scanner. The probe is based on a ZnS (Tl) scintillator connected to an SiPM, combining high efficiency for alpha radiation and low background for beta and gamma. Like all miniGITA probes, it uses ECP and can be used in combination with several other Elysia instruments.
Collimators
To avoid human errors and obtain the best collimation, the miniGITA Dual has tungsten collimators with automatic recognition of GMP documentation.
miniGITA Dual collimator: 0-60 keV
miniGITA Dual collimator: 60-250 keV
miniGITA Dual collimator: 250-450 keV
miniGITA Dual collimator: > 450 keV